| 技術性能參數 Technical Performance Parameters | ||||
| 概 要 General | 制造商 Manufacturer | 無錫錫合叉車機械有限公司 | ||
| 型號 Model | CPD10 | |||
| 動力形式 Power Type | 蓄電池 | |||
| 額定起重量 Load Capacity | kg | 1000 | ||
| 載荷中心距 Load Center | mm | 500 | ||
| 尺寸 Dimension | 起升高度 Lift HeightB | mm | 3000 | |
| 自由起升高度 Free Lift HeightE | mm | 100 | ||
| 貨叉尺寸 Fork SizeJ×U×F | mm | 920×100×35 | ||
| 門架傾角 Mast Tilt Angleα/β | deg | 6°/12° | ||
| 前懸距 Front OverhangK | mm | 375 | ||
| 后懸距 Rear OverhangM | mm | 320 | ||
| 外形尺寸 Overall Dimension | 總長 Length to face of forkH | mm | 2865 | |
| 總寬 Overall WidthQ | mm | 1080 | ||
| 門架不起升高度 Mast Lowered HeightQ | mm | 1990 | ||
| 門架起升時高度 Mast Extended HeightA | mm | 3935 | ||
| 安全架高度 Overhead Guard HeightP | mm | 2070 | ||
| 轉彎半徑 Turning Radius(outsiade)W | mm | 1900 | ||
| 性能 Performance | 滿載/空載Full load/No load | 行駛速度 Travel Speed | km/h | 11/13 |
| 起升速度 Lift Speed | mm/s | 280/440 | ||
| 最大爬坡度 Max.Gradeability | % | 10 | ||
| 自重 Service Weight | kg | 2800 | ||
| 底盤 Chassis | 輪胎 Tyre | 前輪 Front | 6.50-10-12PR | |
| 后輪 Rear | 5.00-8-8PR | |||
| 輪距 Tread | 前輪 FrontS | mm | 900 | |
| 后輪 RearT | mm | 920 | ||
| 軸距 WheelbaseL | mm | 1250 | ||
| 最小離地間隙 | 門架 MastG | mm | 100 | |
| 驅動 Driven | 蓄電池 Battery | 標準 Standard | V/AH | |
| 電機 Motor | 驅動電機 Drive Motor | kw | 5 | |
| 起升電機 Lift Motor | kw | 7.5 | ||
| 控制器 Controller | 制造商 Manufacturer Drive Motor | 科蒂斯 | ||
| 控制方式 Type | 直流 | |||
| 工作壓力 Operating Pressure for Attachment | Mpa | 14.5 | ||